NTS-6002-WWVB NTP Time Server

NTS-6002-WWVB

New product

Consistent and reliable Stratum 1 NTP Time Server.

More details

£ 995.00 Tax excluded

Delivery: 1 to 3 weeks

More info

NTS-6002-WWVB NTP Server

NTP Network Time Server with WWVB radio time receiver

An updated version of the NTS-6001-WWVB the NTS-6002-WWVB NTP server combines an WWVB radio atomic time signal clock with an embedded Linux solid state computer and offers straight forward configuration and management via a web browser interface.

The unit connects directly to your network via a CAT5 Ethernet connection and fits in a standard 19" rack. This radio time server incorporates a radio controlled computer clock and remote weather proof (IP65) antenna. Ideally the antenna should be mounted externally on a wall, but can also be mounted internally near a window. The antenna can be positioned up to 200m (600 ft) away as a standard installation, or up to 1,000m (3,000ft) using an optional antenna extension kit.

The NTS-6002-WWVB has a backlit LCD display to show both time information and radio signal reception to aid installation. The Software drivers conform to the Network Time Protocol Version 4 (NTP V4) and are available for uni-cast, broadcast or multi-cast NTP time synchronization. Configuration and management of the unit is straight forward via a network interface. The IP address of the unit can be configured by using DHCP to assigning an IP address automatically or a fixed IP address can be used.

The NTS-6002-WWVB has dual Ethernet ports enabling it to serve time to 2 independent networks and can handle more than 250,000 NTP requests per minute per network, making it the first choice for providing accurate time information to large networks with thousands of clients!

MCF(United Kingdom) and DCF (Germany) radio receiver options are also available for this product.

Key Benefits

  • Ready-to-operate Secure Stratum 1 NTP Time Server.
  • Industry leading 6 Year Warranty.
  • Includes WWVB radio antenna + can support a secondary active GPS antenna.
  • Support for NTP v2, NTP v3, NTP v4 and SNTP compatible clients.
  • Configured across network via a secure browser interface by http / html / https (RFC2616).
  • Dual RJ-45 Ethernet interfaces 10/100 MBit.
  • Can handle more than 250,000 NTP requests per minute per port, ideal for large networks.
  • MD5 authentication for advanced security.
  • Able to Peer with other NTP time servers for enhanced synchronization security.
  • Solid State Flash memory enables software upgrades and eliminates 'disk failure.'
  • Front Panel display for Time and Satellite and Radio time Status.
  • SNTP and NTP protocol support.
  • Syslog error reporting.

Key Features

Product Specification for the NTS-6002-WWVB time server
Receiver:WWVB radio receiver
Timing Accuracy:Network: ± 10 milliseconds, typical
GPS: <1 microseconds, relative to UTC
NTP Time Requests:>250,000 requests per minute
Supported Networks:Can supply time to 2 separate networks
Power Consumption:27 Watts
Housing:Standard 19" rackmount (1U)
Dimensions (H × W × D):45mm × 425mm × 309mm
Display:LC-display, 2 x 20 characters, with backlight
Operating System:Linux
Protocols (NTP & SNTP):NTP: v2 (RFC 1119), v3 (RFC1305), v4 (RFC 2131)
SNTP: v3 (RFC 1769), v4 (RFC 2030)
Network Interface:Dual RJ-45 Network Connection 10/100 MBit
Power supply:85 - 260V, 47 - 63Hz
Operating Temperature:0-50°C / 32-122°F
Operating Humidity:Max. 85%

What's in the box

What's included with the NTS 6001 msf NTP server
  • NTS-6002-WWVB Unit.
  • WWVB Radio Antenna (with a 5m/4 Core Cable - not shown.)
  • Instruction Manual.
  • Power Lead.
  • NTP Software CD.
  • Junction Box (used to extend antenna cable - if necessary.)
  • IDC Cable Tool (used to insert cable into the junction box- if necessary.)

Additional Extras

The following products are also available for use with the NTS-6002-WWVB NTP Time Server:

Accessories