NTS-6002-GPS-DCF NTP server a professional grade, highly accurate network timing device. The unit synchronises to connected GPS and radio antennas (stongest signal), always providing a secure time server source behind your fire wall.
This product is no longer in stock
The NTS-6002-GPS-DCF is an update to our best selling NTS-6001-GPS-DCF Unit. The Hardware has been upgraded to include a quad core CPU and reduce the power consumption of the unit.
NTS-6002-GPS-DCF Network Time Server combines a GPS receiver and an DCF radio time signal receiver with an embedded Linux solid state computer running and straight forward configuration and management via a web interface. This combination of GPS and radio time sources means that the unit will never be out of synchronisation as it will always take time from the strongest time source.
The unit connects directly to your network via a CAT5 Ethernet connection and fits in a standard 19" rack. This NTP server incorporates a GPS and radio-controlled computer clock. The GPS remote antenna tracks up to 12 satellites for increased precision and is fully weather proof (IP65) as it must be installed externally. The radio antenna should preferably also be mounted externally, but can also be mounted internally. The antenna can be mounted up to 1,000m (3,000ft) from the unit using an appropriate (optional) antenna extension kit.
The NTS-6002-GPS-DCF has a back lit LCD display to show run-time information for both the GPS subsystem and the NTP server and to aid installation. The Software drivers conform to the Network Time Protocol Version 4 (NTP v4) and are available for uni-cast, broadcast or multi-cast NTP time synchronization. Configuration and management of the unit is straight forward via a web interface. The IP address of the unit can be configured by using DHCP to assign an IP address automatically or a fixed IP address can be used.
The NTS-6002-GPS-MSF has dual Ethernet ports enabling it to serve time to 2 independent networks and can handle more than 500,000 NTP requests per minute per network, making it the first choice for providing accurate time information to large networks with thousands of clients!
|Receiver:||1) Primary receiver Active Antenna GPS 12 channel.|
2) Secondary time receiver for the DCF radio time signal (WWVB, MSF also available)
|Timing Accuracy:||Network: ± 8 milliseconds, typical|
GPS: <1 microseconds, relative to UTC
|NTP Time Requests:||>500,000 requests per minute|
|Supported Networks:||Can supply time to 2 separate networks|
|Power Consumption:||27 Watts|
|Housing:||Standard 19" rackmount (1U)|
|Dimensions (H × W × D):||45mm × 425mm × 309mm|
|Display:||LCD Panel, 2 x 20 characters, with backlight|
|Protocols (NTP & SNTP):||NTP: v2 (RFC 1119), v3 (RFC1305), v4 (RFC 2131)|
SNTP: v3 (RFC 1769), v4 (RFC 2030)
|Network Interface:||Standard 10/100/1000 Base-T, Dual RJ-45 Network Connections|
|Power supply:||85 - 260V, 47 - 63Hz|
|Operating Temperature:||0-50°C / 32-122°F|
|Operating Humidity:||Max. 85%|
The following products are also available for use with the NTS-6002 Dual NTP Time Server: