No products
Prices are tax excluded
View larger 
NTP Analogue Clock
ARC/DWC/ONTA12-BK
New product
The NTP Analogue clock simply connects to an Ethernet port on your network. No additional electrical wiring is required, so installation is inexpensive and the clocks can be re-positioned easily. Power is supplied over standard Cat-5 cabling, using the same power source as Voice-over-IP telephones.
More info
Synchronised NTP Analogue Clock.
PoE analogue clocks are highly accurate and receive synchronized time updates automatically over the network. No need for specialized software – one or one hundred clocks can be controlled from any PC on the network with a simple telnet session. The PoE analogue clocks will find an existing Simple Network Time Protocol (SNTP) server on your network, or you can easily set up a new one.
PoE wall clocks can be synchronised with any of our units with the reference code NTS or TS.
Technical specification
- Large format clock face, visible over 100 feet.
- Highly accurate, +/- approximately 0.5 seconds.
- Set automatically by SNTP (Simple Network Time Protocol.)
- 10/100BaseT Ethernet compatible.
- DHCP or static IP addressable.
- Power over Ethernet.
- Low power consumption, 3 watts.
- No master clock or serial connection required.
Technical specification for POE Analogue Clock
| Dimensions: | 340mm (13.4") diameter x 51mm (2") deep |
|---|---|
| Viewing Distance: | 30+ meters (100+ feet) |
| Accuracy: | +/- approximately 0.5 seconds |
| Operating Temperature: | 0°C to 40°C |
| Operating Humidity: | 95% maximum, non-condensing |
| Power Consumption: | 3 watts |
| Mounting Options: | Surface, Double Dial |
| Construction: | Plastic |